Coltuk.org

Hi peeps,

Sorry for the delay in getting this thing running in the for sale section, had to wait for membership paypal to pass.

Thanks for all the pm's i have noted everyone in a spread sheet for what parts you want and in order of who asked first. I will get back to you all shortly, please be patient as i work 12hour shifts and dont get much time in the evenings. I will be starting work on the car this thursday, i then have four free days then to get things flowing.

Please keep your pms coming and dont be upset if i dont get back to you straight away.

Many thanks

JRC

Right i have compiled a full list i think, with prices, those that pm'ed me with interest please do so again if you are happy with the prices, please supply postcodes and when im on my days off ill try get them weighed up for postage.

1.3 gear box- £50
4G92 mivec engine (think big ends have seized, spares)- £SOLD
Exedy light weight fly wheel and track 3 puck clutch, not seen more than 5k miles- £SOLD

Power flow exhaust system, think it is 2 ¼” but will have to check, exit on the normal side by twin medium ovals, will include Cyborg manifold (and cat and bypass pipe if I can find them)- £300

Evo fuel pump- £SOLD
4G92 mivec Loom- £SOLD
4G92 mivec Engine ECU- £100
Cyborg gearbox with LSD- £500

Climate control air con, evap, condesor, compressor and all other associated parts (will need to buy the loom aswell to make it work and I would suggest also the electric folding mirrors)- £200

Side skirts, Face lift front bumper, Face lift front splitter- SOLD

Face lift fog lights, plus original switch- SOLD
One piece head lights, pair- £100
Colt electric folding mirrors, pair in black (Not evo bad fit)- £60
Rare mivec rear roof spoiler (looks a bit like civic typeR)- SOLD

D2 coilovers, done less than 5K miles, never seen track.- £SOLD
4x17” 4x114.3 PCD alloy wheels all with nearly new toyo performance tyres- £200
4x114.3 PCD hubs (front and rear from cyborg)- £SOLD
Cyborg drive shafts- £SOLD
Twin pot callipers and disks front 4x114.3 PCD from fto- £SOLD
Rear disks and calipers from cyborg 4x114.3PCD, including hand brake cables- £SOLD
Larger brake servo from fto- £SOLD
Rear arms and anti roll bar from cyborg- £SOLD
Front cyborg anti roll bar, with white line poly bushing- £SOLD
Rear trailing arms with poly bushing- £SOLD
Front under brace- £SOLD
Aluminium cyborg upper brace (V rare)- £SOLD
Aluminium cyborg rear upper brace (V rare)- £SOLD
Front and rear cyborg shock absorbers- £100

Cyborg door cards and matching rear bench - £100
Front bucket seats, pretty tatty, extremely comfy- £SOLD
Cyborg White dials- £SOLD
Momo steering wheel, not evo, personally I think its better, alacanter finish, will not slip in your hand- £SOLD
Momo gear stick knob- £25
Richbrook leather gaiter- £SOLD

4x114 15” buddy club lightweight alloys no tyres- £200

FTO Miltec exhaust system, cat back- £SOLD

Complete FTO GPX v6 mivec Engine in parts with manual flywheel/clutch, was a runner, very sweet, Coltman witnessed running. Stupidly stripped believing could fix up- £offers

GPX loom- £offers

FTO ancillaries- All available I think £offers

ill take the fuel pump & brake servo pm me with payment inc delivery matey

would really like the borg spoiler is it first come first serve lol

Scotty, ill get onto it on Thursday.

Tom- PMed

thought I was taking the D2's?

YGPM brotha!

This is Cyborg CJ?

Yes

4x17” 4x114.3 PCD alloy wheels all with nearly new toyo performance tyres- £200


intrested mate what alloys got pics ? also what size toyos?

hi ill have to front foglights ans switch please. ive been looking for these for absolutely ages. is it £60 + p+p, if not then how much? postcode is DA4 9HX, want these so bad.

thanks callum

Did you get my pm regarding the GPX engine loom and Downpipe and Cat if you've got them?

Also let me know if you end up splitting the black plastics

Danbob, i did, i thought i pmed you back, must have not. Ill see what i can find on thursday and let you know. I dont think i have the Cat, but im pretty sure i have the V6 downpipe.

Is it the downpipe or manifolds you mean?

JRC

Creekie, there is one other person who has beaten you to the post. If they dont want them you are next in line.

Carbon addict, i work from 6 till 6 so wont be able to get any photos up till thursday, hope thats ok.

Wip- you are first inline for the D2's dont worry.

Its not actually a Cyborg but dam well as good as, i bought a cyborg and changed everything over, if you can tell the difference then your more of an entheusiast than me.

Awesome lol sorry I just don't wanna be stuck somewhere in London and take the RAC man 5 hours to get to me

jrc if you dont sell the mivec engine could i rob the rocker cover in plastic covers?

steve

Yeah the downpipe mate, got the mani,s, cheers

thats fine mate no rush what size are the toyos on them aswell mate?

Interested in the engine or the head only if you are willing to split. Also the alloy strut braces. Are these Ralliart/ Mitsubishi Items?