Coltuk.org

Ok so i've been thinking i might fancy a change which means all my colt stuff would be for sale.

i've owned colts for 7 years now and over the years have collected alot of rare / desireable parts.

Chances are i'll only sell up if i could sell all my major parts, i'm not going to sell all the good bits and be left with some stuff if its going its all going or i will finally build my car to what it should be allthough i cant be annoyed with it anymore.

So i'm going to list everything i have, there won't be pics or anything yet just a list, if certain parts interest you then post up and i'll give you a rough price which i will be open to offers around that value.

if i can sell all my stuff i may well buy ben's evo colt.

so anyway.

RG Coilovers Used for around 6 months done 3000 miles tops (fit CA and CJ with appropriate top mounts)
Exedy triple paddle clutch used for around 3-4months done 2000miles tops (just run in)
Exedy Lightweight flywheel brand new never used in box (2.5kg lighter than stock)
Full GSR turbo set up for CA type 4G93 engine consisting of TD04 turbo, GSR ecu, GSR injectors, GSR intercooler and piping, GSR BOV, GSR MAF and GSR throttle body (i also have other turbo related parts that would go well with this set up)
Genuine mitsubishi multi layer metal gasket 1.5mm
stainless steel turbo elbow
Fuel pressure regulator with gauge
oil cooler kit with pipes and sandwich plate
Big Evo upgrade type intercooler
Pakfeifer Evo 4 Style front bumper for CA colt would fit proton aswell with slight alteration includes matching fog lights (this bumper is very good quality and fitment it cost me alot of money and is brand new (no silly offers on this)
CA ultra racing lower H brace
CA ultra racing room bar (runs behind back seats along floor)
CA ultra racing fender bars (blots in behind wings to stiffen front end)
CA ultra racing front upper strut brace (multi point also bolts to bulkhead)
Un branded rear lower strut brace
Promote black tinted headlights and indicators
Hydraulic bonnet lifters
Safety devices silverstone half cage (very rare item)
Evo / FTO twin pot front calipers (good condition)
Rear Brake set up missing only handbrake cables
Mistubishi GTI ecu (very rare to find mitsubishi ecu)
2x Sparco TEC fixed back fiberglass shelled FIA approved seats (may not sell depending on price)
+ many many more small parts that i can't quite remember just now

if there are any questions about a certain bit just ask and i'll answer as best i can

post to request a price for a part

also pics will be added if intertest in a certain part is expressed.

so yeah buy all by bits and build an amazing CA

cheers

Interested in Clutch, flywheel and possibly Silverstone cage.

i'd be looking for something in the region of £400 for the clutch and flywheel together

for the cage i'd be looking for around £150 (i'm open to negociation on this though. i forgot to mention the half cage doesn't have the bar type piece that runs along the floor for taking a harness but it can still be fitted with a basic bracket made up)

just remembered some other parts i have

GSR sump (ideal for a turbo build as the sump has the proper fitting for the oil return
Genuine evo 4 bonnet vent with rain plate (had intentions to build it into my bonnet, would make for a very nice colt bonnet IMO)
Genuine asti rear import numberplate recess (planned to sink this into my modded proton GTI bumper for a unique rear bumper)
i've also got a complete GTI bottom end i was sold it as i GSR bottom end but i've got my doubts i'd have to confirm.
I've got a GTI twin cam head complete with cam's valves etc.
I've got another GTI bottom end
I've got 2 1.6 CA engines
I've got a set of used Spax 40mm lowering springs
I've got basically a complete black interior for a CA, dash, door cards, center console and all rear plastics in black.

Thats about all i can remember just now, basically if you need any small CA part i'll probably have it, i have 2 CA's

Are any of the ultra racing bars transferrable to the cjs , I know the lower brace and upper engine brace is a no go

Stef, Hi

I see you have a bonnet Vent, have you got just a bonnet for sale?

Rich

Stef, Hi

I see you have a bonnet Vent, have you got just a bonnet for sale?

Rich

i have many bonnets

the only one that is in pretty good condition would need painting, its currently in a rubbed down state.

as for the braces im not too sure, the rear lower brace will fit a CJ i'd have to look into the others.

is there one in particular your interested in?

The fender bars mainly mate

Bit of a waste of a post here but chuck the post in your sig for more views over time hopefully

Is it a full set if coilovers for a cj? And how much?

are the 1.6 engines mivecs?

I was looking for ages for a GTI Ecu!!!

Paid a huge wad to the ECU Doctor in the end...

Pics of the coilovers please

the coilovers will fit a CA or CJ they just require CA or CJ top mounts depending on what your fitting them too.

looking for something in the region of £250 for the coilovers, no pics at the moment tho.

the 1.6 engines are not mivecs

how much would you be looking at for these items please.

CA ultra racing lower H brace
CA ultra racing fender bars
CA ultra racing front upper strut brace

and do you have any pictures please.

lower h brace around £50
fender bars around £50
upper strut brace around £50

no pics as yet but i could get pics as soon as i could.

well if you do sell the stuff, im deffo in for these mate

no problem sir

i've remembered some more parts i have

arospeed adjustable cam pulleys
rpw anti lift kit
various superflex poly bushes (i need to check to see exactly what i have ask about ones your interested in)
genuine CA cyborg r spoiler with brake light (in need of slight repair, i'll get pics if anyone's interested)
i also have promote gti arches and side skirts (being honest these are pretty piss poor quality so they'll be very cheap as they'd need work to fit)
i've also got a proton gti rear bumper thats had the bump strips smoothed to suit a colt, i planned to combine this with my asti number plate recess to make a unique bumper for the CA its all ready to paint going cheap i've even got fog lights for it

also if you need anything at all its probably worth asking because i may well have it i've not seen the majority of these parts for a while.

I'd be interested in the pulleys